What is an Historic Resource Site?

The majority of Tree Time’s archaeological work is done in the context of Historic Resources Impact Assessments, but what is an Historic Resource?

People are sometimes confused about what constitutes an historic resource because it is a very broad category. The first thing to come to most people’s mind would likely be the contents of a museum but as discussed below, historic resources encompass far more than the displays at museum. In the simplest sense an historic resource is anything of significant interest to a community, a cultural group, historians, archaeologists, or other scientists.

Alberta’s Historical Resources Act defines Historic Resources as:

any work of nature or humans that is valued for its palaeontological, archaeological, prehistoric, historic, cultural, natural, scientific or aesthetic interest.”

A Historic Resource Site is any place where Historic Resources are found. When we say “site” people most commonly think of an archaeological site, but this is only one type. Alberta Environment and Parks has defined six categories of Historic Resource sites – archaeological, cultural, geological, historic, natural and palaeontological. However, an Historic Resource site can fall into multiple categories – one doesn’t take precedence over another. Some examples of this are the Big Rock Erratic at Okotoks which is classified as both a geological and an archaeological historic resource site and the Frank Slide which is both a geological and historic site.

The government of Alberta keeps track of all the known historic resource sites in the province. To do this they use a tool called the Listing of Historic Resources. This listing is a database that contains information about historic resource sites such as their location and a description of what they are and what condition they are in. It is important to be aware that not all historic resources are recorded in this listing as many of them have not been recorded yet and the listing is not updated every day.

Some examples of Historic Resources sites found in Alberta:

Archaeological Sites

Archaeological sites are areas that have been occupied by humans in the past and have evidence of that occupation in the form of artifacts found on or under the earth’s surface. Some examples of archaeological sites common to Alberta include precontact campsites, rock art, tipi rings, buffalo pounds, homesteads, trails and medicine wheels. Some well known examples of archaeological sites in Alberta include Head Smashed-In Buffalo Jump and the Bodo Archaeological Site.

Cultural sites

Cultural sites are sites that have been identified as significant to a specific cultural group by members of that group. These sites often include historic villages, cabins and community campsites, burials, prayer trees and other ceremonial sites. The majority of Culturally Significant sites are of First Nations origin, but not all are. Some examples are Pierre Grey’s Trading Post, the St. Charles Mission Site, the Grande Cache Dinosaur Tracks site, the Ukrainian Cultural Heritage Village and Áísínai’pi (Writing-on-Stone) rock carvings and paintings. Culturally significant historic resources often overlap with archaeological and historic period sites.

Geological sites

This site type will often have overlap with other types of Historic Resources. Geological sites are areas of the province with unique geological features like the Canmore Hoodoos, Hetherington Erratics Field and the Whitecourt / Woodlands Meteorite Impact Crater.

Historic Sites

Historic sites are places that can usually be related back to specific people or events in history. This category is a little more complicated because it includes heritage structures, historic places and districts, and historic period archaeological sites.

The most common Historic Sites are places with preserved historic buildings. The Province tracks historic buildings in a database called the Heritage Survey. Any structure older than 50 years is eligible to be added to this list. This of course includes old buildings, like houses, grain elevators and train stations, but also includes other types of man-made above-ground structures, including earthworks, preserved wagon trails, and early 20th century oil wells. Historically significant structures or places can be designated as Municipal or Provincial Heritage Resources, and protected. Some examples of these include include the Brooks Aqueduct, the Alberta Pacific Grain Elevator near Castor, the Parliament Building in Edmonton and old houses in the Highlands neighbourhood of north Edmonton.

Other Historic sites are areas with known historical significance. While these sites may not have retained any standing structures they are places where significant events are known to have taken place or important historic figures visited. These include the locations of many historic fur trade posts and forts. Some of these sites have been recreated for public enjoyment and educational purposes. Some examples of this are Fort Victoria, Lac La Biche Mission and Historic Dunvegan. Other historic sites in Alberta include the Victoria Settlement, Frog Lake Massacre Site, and the Grand Rapids Portage on the Athabasca River.

Historic period archaeological sites are the most common example of overlap between two categories. These are places with underground material evidence of the past (archaeological resources) from the historic period. At these places, archaeologists have documented the presence of historic period artifacts, ranging from fur trade beads and tools, to early 20th century cans and bottles. We may or may not have written records about these sites. Common examples of this site type are fur trading posts, pioneer homesteads, and early trapping cabin locations. A less common example would be this plane crash.

Natural sites

Natural sites are areas of special and sensitive natural landscapes of local and regional significance. These sites often have overlap with archaeological and historic site types. Some examples are Eagle Butte, Purple Springs and the Rumsey Natural area.

Palaeontological sites

These are sites where fossils can be found. Fossils of plants, animals and even dinosaur bones fall into this category. Examples include Dinosaur Provincial Park near Brooks and Pipestone Provincial Park near Grande Prairie.

Index to Alberta Homestead Records 1870 to 1930

Many people are interested in researching their family history and genealogy. The Index to Alberta Homestead Records are an excellent place to start your research. The following blog will give instructions on how to use the Index. If you wish to learn what the homestead records are, or how they can help archaeologists, please check out our previous posts.

The Index to Alberta Homestead Records 1870 to 1930 was a project created for the 100th anniversary of Alberta joining the confederacy. The members of the Alberta Genealogical Society and friends created an all name index to the homestead files to help researchers. There are 686 reels of microfilm that contain homestead records from 1870 to 1930. With this index, the researchers would be pointed to the exact reel and file number. For more information on this project or the Alberta Genealogical Society please visit their website (http://www.abgenealogy.ca/).

You can search the homestead record index by different methods including surname, legal description, or place name. Once you have that information either visit the Alberta Genealogical Society’s website and under resources click on Alberta Homestead Index then search the index or click on the following link: http://www.abgenealogy.ca/ab-homestead-index-page.

If you are doing research on your own family history, you can search by surname. When we were conducting research on the cabin that we found near Peace River, we searched the area by the legal land description.

legal search

Once you fill in the information you have, the search results will automatically appear. You can see part of our results below.

Index search results

If you want to see the scanned microreel file of the homestead records, you will need to copy the film number and the file number. The film number for the homestead records only consists of numbers. The one we were searching for is circled in green. The red arrow is pointing to a different file type (grazing lease) and it consists of letters and numbers. Once you have the film and file number, go to https://archive.org/. In the search area type in Alberta homestead with the film number you wish to search for as we did below.archive search

The reel with your homestead record should pop up. Click on the link (where the red arrow is pointing).

reel results

Then you can download it in the format that you wish. Personally I prefer downloading it as a PDF.download

The next step is the longest part of the process. You will have to look though the reel until you find the file number associated with your previous search. This may take some time because reels can contain hundreds of files. As mentioned in the previous blog post, the file number is associated with a quarter section of land and the first page often contains the file number. If you searched by a person, you might find that the results will have multiple file numbers (maybe even on multiple reels), indicating claims on different sections.

If you are not able to do the research yourself, you are able to order the homestead records (or other research) from the Alberta Genealogical Society. Check out the following link for more information

http://www.abgenealogy.ca/content.php?nid=1550&mid=1155

The Alberta Homestead Index is a wonderful tool directing researchers to the required reel or reels. Before this index was created you can imagine how long it would take to search through all of the records. This is especially true when searching by surname since the only way to tell if someone tried to homestead multiple sections would have been to search though every single record. Thanks to the Alberta Genealogical Society this is no longer the case. Happy researching!

The Alberta Homestead Process

Homestead records are a valuable research tool for archaeologists, historians and for people researching their own family history or genealogy. If you want to see how homestead records can help archaeologists please read our previous blog post. Before I explain how to use these records, I will give a brief description of the homesteading process and what type of files you might find in the records.

In order to gain land under the Dominion Lands Act, people who wished to homestead had to apply at the local land agency office. These offices were under the Dominion Lands Branch in Ottawa. For a $10 filing fee, an applicant could apply to homestead a quarter section (160 acres). Once a quarter section was homesteaded for the first time it was given a file number. All documents related to that section of land were then filed under that number. As we saw in the previous blog post about the cabin we found near Peace River, multiple people might apply to homestead on one section.

The first page of the file for a quarter section typically looks just like this (see below). The number circled in red is the file number.

file number

After filing, the homesteader then had three years to ‘prove up‘ their homestead claim. The requirements changed over the years as did the requirements for eligibility of the applicants. If you did not complete the process in three years, you would have to ask for an extension. One file contained a statement of a homesteader asking for an extension because his neighbor (allegedly) killed his horses.

horses

Applicants typically had to be male, meet the age requirement, and be a British subject (or declare an intention to be one). The required duties were that the person had to occupy the land for a set amount of time and had to undertake certain improvements upon the land within three years. The improvements usually included the construction a house and fences, and breaking and cropping a portion of the land. If you “proved up” your homestead you could apply for a patent which would give you legal ownership of the land. There were special exemptions to these rules. For example in some cases widows could apply for patents upon the death of their husbands, or as in the case below their “mysterious disappearance”.

widow

For more information on the changes to the original Dominion Lands Act, check out this website:

http://www.saskarchives.com/collections/land-records/history-and-background-administration-land-saskatchewan/homesteading

The files normally include an application for homestead, an application for patent, and a notice that the patent has been issued.

The application for entry is the first form that was filled out when someone wanted to homestead a quarter section. This form would capture information about the applicant’s age, birthplace, last residence, prior occupation, and the number of people in the household.

Below is a picture of what the top half of an application for entry looks like. You can see that the file number is recorded on the page.

appplication for homestead

When we were researching the cabin near Peace River, the forms that we found were all application for entry. This usually indicates that the land was abandoned and wasn’t successfully homesteaded before 1930. After 1930 the homestead process changed as control of natural resources was transferred to the province.

The application for patent is the form that was filed to gain the patent (title) for the land. In order for the patent to be granted the applicant had to complete the required duties. These forms contained information about the applicant’s, age, occupation, nationality, number of people in the household, residency information, post office, as well as work they’d done like breaking, cropping, buildings, fencing, and livestock.

The notification of patent is the letter granting the patent (title to the land). It demonstrates that the applicant was successful and gained legal ownership of the land and it contains the date it was issued.

Sometimes the application was not for a homestead but for a pre-emption or a purchased homestead. A pre-emption allowed a homesteader to obtain a second quarter section of land next to their homestead entry. They had requirements that had to be fulfilled in addition to the requited duties of the homestead. Purchased homesteads were typically bought for $3 an acre. The accompanying files for both pre-emptions and purchased homestead are typically the same as those for the homestead applications.

The files can contain additional documents such as inspector’s reports, witness affidavits, records of abandonment, handwritten letters, court proceedings, wills, naturalization, and even poetry and pictures.

photo of poet

poem

The above images are of the poet and poem found in the same file. Although this is by far not what the typical file looks like, until you look at the file you will never know what type of information you can find! If you want to learn how to use the Alberta Homestead Index for research keep an eye out for our next blog post.

Glacial Flutes

Ryan is doing layout work to protect wetlands and streams during aerial herbicide application and he got this great shot of glacial fluting northeast of Calling Lake.

These parallel ridges were formed when the Laurentide ice sheet coming southwest from the Canadian Shield hit bedrock uplands at the east end of the Pelican Mountains. The base of the glacier formed a saw-tooth pattern that scoured these ridges and troughs for several kilometers.

Lidar flutes
This is how these glacial flutes appear on LiDAR.

Finding Archaeological Sites from the sky using high-tech advances in archaeology

In recent months, news feeds have been erupting with stories of “Lost Maya Cities discovered using LiDAR”, “revealing the secrets of Stonehenge using LiDAR”, “LiDAR uncovers ancient city near Angkor Wat”, and the popularity of “space archaeologist” Sarah Parcak, but this technology is not limited to finding the remnants of “lost civilizations” in far reaching corners of the globe. LiDAR is used by archaeologists in Alberta to assist in the locating of potential archaeological sites that are threatened by development.

Figure 1. Marching Bear Effigy Mounds Lidar Imagery (Wikimedia Commons)
Figure 1. Marching Bear Effigy Mounds LiDAR Imagery (Wikimedia Commons)

Light detection and ranging (LiDAR) is the process of mounting a laser on an aircraft and bouncing light pulses off the ground and measuring the time it takes for the laser to return. The process can take 2000-5000 measurements per second and makes the surface appear treeless, revealing surface features that cannot be seen using simple satellite imagery or aerial photos (Figure 1). However, using LiDAR to find archaeological sites in northern Alberta is not as easy as it can be in other parts of the world. LiDAR is great for identifying building structures, walls, and other features common of archaeological sites in other parts of the world. In northern Alberta these features are absent from Indigenous archaeological sites. To study the human history of northern Alberta prior to European contact we have to look at the landscape and identify landforms that would have been suitable for camping and hunting activities.

satellite
Figure 2. Satellite imagery of ridge overlooking marsh
lidar
Figure 3. LiDAR hillshade of the same ridge

In the above images, the first image is a satellite image of a ridge where we found an archaeological site (Figure 2). With just satellite imagery the area appears to be predominantly flat which is not a good area to camp or hunt. This is because the area would be thought to be poorly drained and with limited visibility of the surrounding terrain. When using LiDAR imagery (Figure 3) we notice there is a complex of distinct hills and ridges that would be ideal for making camp.

This technology has revolutionized the process of finding archaeological sites in Alberta and is revealing more about the history of people in the boreal forest. The ability to pinpoint the best landforms without having to do extensive on-the-ground survey has greatly increased the inventory of sites found in northern Alberta. This benefits our clients who will pay less money for the survey of their developments and we can make more accurate predictions about site locations which allow them to modify their developments to avoid potential sites.

Introduction to CRM Part 5: Reporting

Once we have surveyed our targets and evaluated any sites we have found, it is time to return to the office. All of our notes are taken on an ipad in the field. Now all we have to do is export our notes into a database which eliminates the hours spent on data entry.

Note taking is extremely important for archaeologists (Figure 1). The notes supply researchers the context of the artifacts. In this case context means the precise location of the artifact and it’s association with other artifacts and landscape features. This helps researchers determine such things as the relationships between artifacts on a site, it’s position in time and space, and even how it is related to different archaeological sites (Figure 2). Without notes and proper excavation methods, the context in which the artifacts were found is lost forever, and the artifacts have little scientific or interpretive value.

DSCF2352_resized
Figure 1. Eric taking notes on an iPad that will later be used to interpret the site.
PA030741_resized
Figure 2. An artifact in it’s original context found at an historic site.

We also catalogue all of the artifacts that were collected in the field. We take measurements, weights, and note details such as material and artifact types, and enter them into a database (Figure 3). This along with the site notes gives us the information we need to write our reports.

01072015172
Figure 3. Madeline is weighing an artifact.

In the final stage of the Historic Resources Impact assessment, we compile a report of all the work that we have done and submit it to our clients and the government. The report identifies which developments need to be modified to avoid impacting significant archaeological and historic resources. The site information is included in a government database of all the sites in Alberta as a reference for future industry development as well as researchers. This minimizes the impact that our clients have on Alberta’s history while preserving the past for future research and education.

Introduction to CRM Part 4: Evaluating a Site

DSCF1606_resized
Figure 1. Positive shovel test that contained lithic debitage.

When we identify a site, we conduct further evaluative testing to determine the type, character, and extent of the site. This is done according to government guidelines, and depends on the type of site, and the type of landform. If the landform allows for it, testing occurs in each cardinal direction or in a grid. Some sites are found on ridges or point terraces, and so in these cases, it is not possible to test in all directions (Figure 1).

Tree Time’s standards are that there must be three negative tests spaced at most 10 m apart in each direction from any positive. Sometimes additional tests are required in order to determine the significance, the size, and type of the site. For example if none of the evaluative tests were positive, further testing might be done at closer intervals to better determine the significance of the site. In addition to rigorous note taking, we also map and photograph the site (Figure 2).

P6050160_resized
Figure 2. Vince taking notes at a site.

The evaluation of the site is an important step for two main reasons. The first is to enable the government to maintain an accurate site database and to better inform future researchers of the size and type of sites are in the area (Figure 3).

PA030750_resized
Figure 3. We are evaluating an historic site by flagging artifacts with red flagging tape.

Secondly, in this stage we determine the extent and significance of the site. If a client decides to avoid the site, delineation allows us to more precisely buffer the site. This is important because it allows the development to occur as close to the original plan as possible while still avoiding impacts to the site. In addition, if a client chooses to mitigate their impacts to the site through excavation, a more detailed evaluation of a site allows us to better predict the productivity of the site, and to render cost estimates of any mitigation work more accurately.

DSCF1930_resized
Figure 4. Buffer flagged around the site with orange flagging tape.

Once we have surveyed our targets, evaluated any sites we have found, and have finished our notes, it is time to return to the office (Figures 5 and 6).

P9010529_resized
Figure 5. Reid is finishing his notes before we move onto another target.
PB210773_resized
Figure 6. After a long cold day, Brittany heads back to the office.