This week we feature a picture of an asymmetrical knife found north of Lac La Biche at a site called Buffalo Beach. The knife has one rounded retouched cutting edge and the other edge is straight. The notched knob at the bottom of the artifact is where the knife would have been attached to a handle. The handle was likely made from an organic material that does not preserve as well as stone (for example bone, antler, wood, etc.). The style of this knife does not match any previously recorded artifacts found in Alberta.
This week we feature a stone tool found upstream on Fall Creek, about 55 km west of the community of Caroline, AB. We were undertaking an assessment for Sundre Forest Products and testing a flat area overlooking the creek (shown below) when Ryan found the end scraper shown above.
A “scraper” is a type of tool that is usually unifacial, meaning the stone was worked on one of its sides (or faces) only. Compare the two sides shown in the image above and you’ll see the one shown on the left is much smoother, except for a small piece that may have been broken off when digging the shovel test. The face of the scraper that is worked typically has pieces chipped off on the side or end in order to make a thick and strong edge. This is the scraping edge that could be used to prepare hides.
Unifacial working and a thick edge are the two main criteria used when identifying an artifact as a scraper, so as you can imagine there are a lot of different styles of scrapers found at archaeological sites. Just take a look at the beautiful example Reid describes in this blog post.
Regardless of what style of scraper you’ve found, a close look at the edge of these artifacts can reveal some “use wear,” when the edges become chipped, polished or worn down through the process of scraping hides, bone, wood or other softer materials. As a result of this wear, scrapers would occasionally need to be resharpened and the tools would become smaller and smaller through the resharpening process. It’s possible this scraper was considered too small to be of any more use and so was thrown away only to be found by us, perhaps thousands of years later.
This week we feature an artifact found recently while conducting a survey for an Associated Aggregates gravel pit along the Nordegg River. The artifact is an irregular biface that is likely a preform. A preform is often an ovate or triangular shaped rock that has been flaked on both sides using percussion and pressure flaking techniques. This artifact was likely in the early stages of becoming some form of tool (e.g. knife or projectile point) before it was discarded by the flintknapper.
It is not clear why the flintknapper quit working on the artifact, the knapper may have made a mistake or did not like the stone material. The artifact is made from a unique red speckled chert with some fossilized plant remains embedded on the dorsal side of the artifact. We asked the consulting community if they knew what kind of chert the artifact was made from and Jason Roe, Lifeways Canada, identified the material as Paskapoo chert.
The artifact was found at a site identified by our clients, Dan Hill and Jodie Bauman, who were interested in the process of historical resource impact assessments (HRIA). While screening a shovel test, under the supervision of our archaeologists, Jodie found a large utilized quartzite flake. Further testing, revealed the site was over 200 m long and had evidence of fire (fire cracked rock) and tool making (biface).
This week we feature an artifact from a large site we found on the Pineneedle Creek valley margin, west of Caroline (a community between Rocky Mountain House and Sundre) and off of the Forestry Trunk Road. The site was found when we were undertaking an assessment for Sundre Forest Products. More than 100 stone artifacts were recovered from this site, most of which represent chips broken off when making stone tools. This one stands out from the rest. It’s not so obvious an artifact as some of the stone tools we’ve shown in previous blog posts, but it represents the other critical component of an arrow or a spear: the shaft.
Figure 1: Two sides of an ancient spokeshave.
This is a “spokeshave”. This kind of tool is used even today for shaping and smoothing wooden rods for wheel spokes, chair legs, paddles, etc. You can find a spokeshave at your local hardware store, but it will look nothing like the example shown above.
An ancient spokeshave is thought to have been used to shape shafts for arrows, spears and darts. It’s recognized by the semi-circular notch on its side where you can imagine a wooden rod fitting nicely. In the picture above, the arrows are pointing to the notch on this artifact.
In many parts of Alberta, the soil is so acidic that materials like bone and wood don’t preserve so we don’t find arrow shafts. It’s pretty exciting and humbling to find an artifact that reminds us that there were once many more materials at these sites.
The Brazeau Reservoir Archaeological Survey is a project hosted by the Strathcona Archaeological Society, and is sponsored by Tree Time Services. It currently is centred around a large campsite and workshop on the upper valley margin at the confluence of the Brazeau and Elk Rivers, located near Drayton Valley and Rocky Mountain House.
The main site, FfPv-1, was found in 2009 by Sandy and Tom Erikson while out on a day hike. They contacted the Royal Alberta Museum to report their finds, and the site was visited by curators Jack Brink and Bob Dawe in 2013. They conducted an exploratory survey with Sandy and Tom, and found five additional sites, FfPv-2 to 6. These sites are all located around the edge of the upper water lines of the Brazeau Reservoir, and are covered by water for most of the year.
Jack and Bob brought these sites to the attention of the Strathcona Archaeological Society as an opportunity to engage with the society’s members through the practice of archaeology. What made these sites perfect to use for a volunteer project is that all the sites were identified by the artifacts found on the surface, thanks to the reservoir water that slowly stripped the soil away. This meant that volunteers could learn how to spot the artifacts sitting on the surface.
In 2015, Madeline Coleman, one of our Permit Archaeologists, co-organized the pilot volunteer project with another SAS member, Amandah van Merlin. Volunteers travelled across FfPv-1 to figure out the site’s extent, and what type of site it was. Survey of the landforms around FfPv-1 found three new sites!! Volunteers also found projectile points that crossed almost the entire expanse of Alberta Precontact history. The cultural phases represented include Clovis, Agate Basin, Hell Gap, Oxbow, and Plains Corner-notch.
Based on the location of the sites, it is very likely that the sites are located around the whole reservoir! The construction of the reservoir began in 1910, long before developments in Alberta were examined for impacts to archaeological resources. Currently, many of the sites recently identified are only accessible by boat.
A new survey with test excavation units are planned for May 28th and 29th. To register or for more information, email Madeline at [email protected]
This week, we showcase a stone drill. That’s right, you guessed it, this type of stone tool is used to drill holes in things. Like knives and projectile points, drills are worked on both sides to create sharp edges and a narrow tip. Unlike other stone tools however, drills are very narrow and thick, and often are diamond shaped in cross-section. This design makes the drill stronger, and less likely to break. In Alberta, stone drills are often either long and straight, with a bulb or a “T” shaped base. More often than not, you find the broken end of drills, because they snapped off while in use. The stone drill bit would be attached to a long wood handle using sinew, rawhide, and pitch, and then spun to create the circular motion for drilling. This could be either done by hand, or using a small bow and string to spin the drill.
We found this stone drill while working for Sundre Forest Products in 2012, in the Foothills west of Red Deer. The artifact is made from a brownish-gray chalcedony, and also shows evidence that it was heat treated. The drill has small “potlid” fractures, where irregular pieces of the stone popped off. This type of break happens when a stone is quickly heated and cooled.
This week’s photograph is of an artifact we found in 2015 when undertaking an HRIA for Sundre Forest Products. It comes from a site south of the Ram River – our 100th site of the year, in fact. It’s an exciting find: a spear point of the Agate Basin style. The picture above was taken when it was found and the picture below shows the point after it was catalogued in our lab. We have found our fair share of points over the years, but this is a rare one because of its age. Agate Basin points are some of the oldest found in the province and date between 10,200 and 9,600 years ago.
The site was identified when we were surveying a disturbed area. Like Corey explained in his blog entry, a lot of information may be lost when a site is disturbed because the relationship of one artifact to another has been disturbed. Although we always hope to find sites intact and undisturbed, disturbances like erosion can allow archaeologists to see a larger area of soil than through shovel testing alone. This artifact was found lying on the ground when we were walking over a ridge. This is why archaeological assessments in disturbed areas can be worthwhile. It’s also why archaeologists are hard to walk with – they’re always looking down, searching for artifacts in even the most unlikely places.